Pendulum Spot

Pendulum Spot

The arm spot has been an integral part of trade fair lighting for years. This product can really be used in every possible way, be it illuminating a small exhibition stand, illuminating a banner or for use on a tubular frame. The arm spotlight provides the right lighting quickly and easily, even at the smallest events or trade fair stands.

LED

Arm spots are actually very easy to use. In fact, their simplicity is one of the best things about them. There are no buttons or settings at all on this spot. All you have to do is plug it in and you’re good to go. The only manual setting available to you is tilting the head. This allows you to move the beam either towards the wall or away from it. You’ll be able to direct the light wherever you need it to be. Contrary to the old-fashioned concept of an arm spot, what’s inside these ExpoLED arm spots is actually very modern. This spot makes use of LED lighting rather than halogen lighting. This makes this pendulum spot not only very energy efficient, but also results in much less heat production. Are you considering using this arm spot to light a wall or small exhibition stand? We highly recommend this product, provided that the lamps are not going to be mounted any higher than 3 metres on the walls or exhibition. You can of course choose mount this spot higher, but we cannot guarantee that this will provide sufficient light to illuminate you banner or exhibition stand.

Connecting

There’s often quite little space on top of exhibition walls or banners for mounting cabling and connector blocks. Our arm spotlights are equipped with both a current input and output. This allows you to connect the spots to one another and easily provide power. This also has the added advantage of not needing to use multiple sockets. This ends up saving a lot of time and effort, as you no longer have to set up and get rid of the cabling and power dividers. For optimal results, we recommend hanging the spotlights up to 125 cm apart. If the spotlights are hung further apart, there is a chance that the wall or banner will not be illuminated evenly. This could result in spots at the top of the wall that are not at all or not sufficiently illuminated.

Mounting

Two exhibition stands are of course never the same. There is no such thing as a standard size and this means that drawing up lighting plans is always custom work. Fortunately, these arm spotlights can be fastened in many ways, meaning that they can be mounted on the most common walls and banners. Each arm spot comes with a clip for mounting on wooden stand walls. This clip has a width of 10 cm and a depth of 3.5 cm. It can be mounted on top of a wooden stand or exhibition wall using screws. You should bear in mind that the wall must have a minimum depth of 3.5 cm, otherwise the clip will protrude over the wall.   A special tubular clip is supplied for mounting on a tubular frame. This is suitable for mounting on all kinds of pipes and tubes with a maximum diameter of 50 mm. Please take into account that on pipes with a diameter of around 50 mm, the knob will protrude a few centimetres to the front or back.   Mounting on truss? That’s also possible. A special truss bracket is included for truss mounting. This bracket is placed on top of the truss and clamped into place. This ensures that all armspotlights are at exactly the same angle. This bracket is only suitable for the widely used 30-er truss. Do you want to use this bracket on a triangle truss? Make sure that this bracket is installed apex down.

Tech specs

• Brand

  ExpoLED

• Type

  Novi 50

• Power usage

  50 Watts

• Lamp Type

  LED

• LED Type

  SMD

• Colour Temperature

  4000 K

• Beam Angle

  90 degrees

• Weight Fixture

  1.2 KG

• Dimensions Fixture

  66 x 19,4 x 5,7 cm (L x W x H)

• Weight transportcase

  5 KG

• Dimensions transportcase (Per 6)

  80 x 60 x 23 cm (L x W x H)

Tips